MUT For Torque v2 (com.xkaixrezza.mutiiv2) on Google Play
This is *NOT* a standalone application and will *NOT* work without Torque Pro.*Important : Ensure that you are able to connect to the ecu through torque pro first as this plugin is using a hybrid MUT over ISO9142-2 / Evo X Mode 23 / Evo X Mode 23 RAX Patch.Features - Mode 23 CANBUS PIDs (Evolution X) with RAX Patch Support- Mode 21 SST Transmission PIDs- Revamped Hybrid MUT v2 (For Faster Pooling Rates) & Legacy MUT For Torque v1 Support - Standalone .CSV Logger- Full Control Lock Over Torque Pro To Increase Pooling RatesMUT FOR TORQUE is a plugin for Torque Pro, extending the PID/Sensor list with a number specific parameters for Mitsubushi vehicles on the MUT protocol, including :* Knocksum* Various fuel trims* ECU Calculated Load*PLEASE NOTE* Note not all PID(s) are supported on all OBDII Supported Mitsubishi Models/ECU(s) depending on Sensor availability and such, the plugin was tested only on the following models/engines :* Mitsubishi Colt Ralliart Version-R MT (Z27AG) - MUT Hybrid (Legacy & v2)* Mitsubishi Evolution X - Mode 23 & Mode 23 RAX Patch (Note CANBUS MUT is not supported)- KNOWN INCOMPATIBLE VEHICLES-The Plugin Has Been Reported That It Will Not Work On The Following Vehicle(s)- Mitsubushi Pajero 3.2 B Pre 2006 *If Users are purchasing this plugin for CANBUS Mode 23 / RAX Patch operational mode, do ensure that your vehicle has mode 23 or a RAX patched rom enabled as the Plugin by default was configured for Evo X Rom ID : 59590004 (With RAX Patch), configure the PIDs for your rom after installation through the Plugin Settings.*Additional note for users using the Legacy Mode For MUT: If your facing a "Unable to create importable file" error, please go to settings, unmount and remount your SD Card.-IMPORTANT- The plugin does not currently support vehicles which require CANBUS MUT logging, this plugin requires the MINIMUM of Mode 23 to be ENABLED.= How Do I Achieve Faster Refresh Rates ? =- Enable full control via settings 'Toggle Adapter Full Control'- Reduce the amount of PIDs being enabled via 'Enable / Disable Plugin PIDs For Current Mode'Plugin Installation (For Mode 23 & Hybrid MUT v2 & RAX Patch)-------------------------1) After purchasing the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.2) Launch Torque Pro and click on the "MUT v2" icon3) On First Launch It Should Prompt You To Select The Mode Of Operation4) Allow Torque Pro To Connect To The ECU5) The PIDs should be added directly to Torque Pro6) For Mode 23 Users, Ensure that the Mode 23 PIDs are for your rom via settings.7) Enable / Disable The PIDs and configure their displays through the plugin as Torque will not save the added configuration data due to limitations.8) The Plugin must be launched after Torque Pro has loaded up with the ECU connected to load up the PIDs else Torque would display the PIDs as ExtPID and would refuse to update the data.Plugin Installation (For Legacy Hybrid MUT)-------------------------1) After purchasing the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.2) Launch Torque Pro and click on the "MUT v2" icon3) On First Launch It Should Prompt You To Select The Mode Of Operation, Select Legacy Mode4) Go Back To Torque Pro's Main Screen And Go Into Settings And Manage Custom PIDs5) Import The PID Set Into Torque Pro6) Editing Of Legacy Added PIDs Are Done Through Torque.Adding Displays------------------------1) After adding the additional sensors, go to the Realtime Information/Dashboard.2) Press the menu key and then click on "Add Display"3) Select the appropriate display type4) Select the appropriate sensor from the list. The PID(s) added through this plugin would be in the same name of the Plugin's PID's title as the prefix with the sensor/PID name and should appear on the top of the list.